HDMIEXTEND Point-to-Point HDMI/CAT-5 Extender
The HDMIEXTEND extends your HDTV display up to 200 feet away from your HDTV source using two CAT-5 cables. It is equipped with HDMI™ (high definition multimedia interface) connectors and is capable of supporting DVI (digital visual interface) equipment when used with a HDMI to DVI Adapter, providing greater flexibility and options when integrating several home theater components.
HOW IT WORKS
The HDMIEXTEND transmitter unit sits next to your computer, set-top box or DVD player source. Cables supplied with the HDMIEXTEND connect your DVI or HDMI™ source to the transmitter unit. The HDMIEXTEND receiver unit sits next to your HDTV display - up to 200 feet away. The display plugs into the back of the HDMIEXTEND. The HDMIEXTEND system consists of: (1) HDMIEXTEND transmitter (1) HDMIEXTEND receiver (1) 6 ft HDMI to HDMI Cable M-M (2) HDMIEXTEND wall-mount adaptor plates (2) 5VDC power supply
INSTRUCTIONS 1) Connect your display to the HDMIEXTEND receiver unit 2) Connect your source to the HDMIEXTEND transmitter unit 3) Connect your CAT-5 cables between the transmitter and the receiver 4) Plug the 5V power supply into the HDMIEXTEND transmitter and receiver unit You should now have picture. If you do not see a picture, try unplugging and replugging the HDMI input on the HDMI sender unit. Make sure your CAT-5 cables are not crossover type and have been properly crimped and tested. Cycle the power on the unit. * If problems persist try adjusting the Dip Switches by following the Dip Switch Usage Guide.
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE HDMIEXTEND • The HDMIEXTEND transmitter and receiver is housed in a metal box for better RF shielding. • The CAT-5 cable should not exceed 200 feet. • If you do not need DDC or HDCP data you can use a single CAT-5 cable for the video only. The DDC will not be connected. (For further information, see our Technology Terminology section) If HDCP is required, both CAT-5 cables must be used between the transmitter and receiver units. • CAT6 cable is suitable for high resolutions at 50 meters. SERVICE SWITCH USAGE GUIDE The transmitter and receiver of the HDMIEXTEND products both contain a set of service switches (also called dip switches) located underneath each unit. Peeling back the silver sticker will reveal the service switch bay. These service switches are used to boost and equalize the signal to best match the conditions in your setup. (*Note: Adjustments should be done with sources and display on. Switches 3 and 4 are not used.)
 | Loading… |
 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|