5.25″ HIGH POWER COAXIAL SURFACE MOUNT SPEAKER WITH WEATHERX TECHNOLOGY
SoundTube’s WX Weather Guard technology utilizes a dual layer hydrophobic material inside the speaker grille to keep water from the drivers and internal electronics in even the most extreme weather conditions. Higher power output for long throw and high SPL requirements. One 5.25-inch polypropylene woofer and one 1.0 inch, tractrix horn-loaded, convex aluminum dome tweeter in a ported enclosure. 87.0 dB average sensitivity offers high output capabilities and reduced amplification costs. Includes stainless steel screws and weatherized components for indoor and outdoor applications. Easy access, six-position selectable tap switch for 25-, 70.7- and 100-volt applications with transformer bypass position. Patented ZeroReflection™ enclosure technology for optimal sound reproduction and cabinet rigidity. Aluminum grille with powder-coat finish. Includes the new SM590i-II Stealth™ bracket mounting system. Vertical and horizontal pivoting allow the SM590i-II-WX to be aimed anywhere within the installation space. Low profile enclosure design keeps the speaker close to the wall. UL 1480 (UEAY) planned. Included Accessories: Safety cable with speaker mounting bolt, Euroblock connector, wall mount bracket and terminal weather boot.
| Nominal Impedance |
8 ohm |
| Impedance (min) |
7.0 ohm |
| Sensitivity dB @ 2.83V/1M |
87.0dB |
| Sensitivity dB @ 1W/1M (2) |
87.0dB |
| Frequency Response (± 3 dB) |
100 Hz - 22 kHz |
| Frequency Response (±10 dB) |
69 Hz - 22 kHz |
| Max. Program Power |
160w |
| Max. Continuous Power RMS |
80w |
| Max. Power SPL @ 1 M |
106.0dB |
| Tap Selector |
6 Position rotary switch with transformer bypass |
| 70.7 Volt Transformer Taps |
64w / 105.0dB |
| 100 Volt Transformer Taps (dB) |
64w / 105.0dB |
| 25 Volt Transformer Taps (dB) |
8w / 96.0dB |
| Transformer Options |
25 / 70.7 / 100 Volt option with a 4 Ohm direct |
| Coverage Angle (-6 dB @ 2 kHz) raw |
horizontal
vertical |
| Colors |
Black or white |
| Port length |
5.18 in |
| Tweeter - part |
1 in / 25 mm Convex Aluminum w/ BroadBeam® Waveguide |
| Woofer - part |
5.25" Polypropylene |
| Inputs |
4 Pin, 5.08 mm Euroblock for individual or daisy chain connection |
| Height (SM = Height) |
289.6 mm / 11.4 in |
| Diameter (SM = Width) |
212.3 mm / 8.36 in |
| SM Depth (Including Bracket) |
266.2 mm / 10.48 in |
| Weight |
4.3 kg / 9.5 lb |
| Shipping Weight |
5 kg / 11.0 lb |
| Packaging |
1 per box |
| Regulatory - UL |
planned |
| Regulatory - CE |
Approved |
| Regulatory - RoHS |
approved |
| Regulatory - IP |
IP44 approved |
| Regulatory - CCC |
approved |
 | Loading… |
 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|