800-795-5111

Home >>

SPEAKERS

SUBWOOFERS

QSC ADS112SW SUBWOOFER 12" 8OHM SURF MNT OUTDOOR BLACK

Other products by	QSC
	(Tech Support Website)

Item #:

ADS112SW

MSRP:

No Retail

Description
Description

AD-S112SW

Features

12” weather treated woofer
TFR™ (Turbulent Flow Reduction) port provides optimal resonant tuning and high velocity air flow
Maximum peak SPL 121 dB
Included yoke mount maximizes boundary plane coupling while reducing vibration transmission
Optional M10 Kit-C for additional installation versatility
Advanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-Sys processing or CXD amplifier platforms
Lightweight ABS enclosures offer long-term durability and lasting good looks
Sealed input panel cover and powder coated aluminum grilles for added weather resistance
Meets IEC60529 IP-54 for dust and splash resistance
Available in black (RAL 9011)
Complete EASE, CF2, CAD, and BIM information available online

Specifications

System Details	AD-S6T	AD-S8T	AD-S10T
Effective frequency range1	60 Hz to 20 kHz	55 Hz to 20 kHz	50 Hz to 19 kHz
Rated noise power / voltage2	150 watts / 35 volts (rms)	200 watts / 40 volts (rms)	250 watts / 45 volts (rms)
Broadband sensitivity3	89 dB SPL	90 dB SPL	92 dB SPL
Coverage angle (-6 dB)	105°	105°	90°
Directivity factor (Q)	5	7	10
Directivity Index	7 dB	9 dB	10 dB
Maximum continuous SPL4	110 dB	113 dB	116 dB
Maximum peak SPL4	116 dB	119 dB	122 dB
Rated impedance	8 ohms	8 ohms	8 ohms
Recommended amplifier power (loudspeaker "program" power)	300 watts	400 watts	500 watts
Transformer taps	70 V: 60, 30, 15, 7.5 W and 8Ω bypass	70 V: 60, 30, 15, 7.5 W and 8Ω bypass	70 V: 100, 50, 25, 12.5 W and 8Ω bypass
Transformer taps	100V: 60, 30, 15 W and 8Ω bypass	100V: 60, 30, 15 W and 8Ω bypass	100V: 100, 50, 25 W and 8Ω bypass
HF transducer	1” silk dome tweeter / 1” voice coil, horn loaded	1” exit / 1.4” voice coil compression driver	1” exit / 1.4” voice coil compression driver
LF transducer	6” weather resistant paper cone woofer	8” weather resistant paper cone woofer	10” weather resistant paper cone woofer
LF transducer	1.5” / 38 mm voice coil	2” / 51 mm voice coil	2.5” / 64 mm voice coil
Input connector type	Euroblock connector with parallel output	Euroblock connector with parallel output terminals	Euroblock connector with parallel output terminals
Enclosure material	Painted ABS polymer	Painted ABS polymer	Painted ABS polymer
Grille material	Powder coated aluminum	Powder coated aluminum	Powder coated aluminum
X-Mount material	Powder coated aluminum	Powder coated aluminum	Powder coated aluminum
Enclosure Details
Ingress protection	IP-54	IP-54	IP-54
Operating environment	Designed for indoor and outdoor use	Designed for indoor and outdoor use	Designed for indoor and outdoor use
Testing	The AD Series loudspeakers qualified for outdoor use using the following tests:	The AD Series loudspeakers qualified for outdoor use using the following tests:	The AD Series loudspeakers qualified for outdoor use using the following tests:
	Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.	Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.	Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
	Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days	Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days	Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
	High and low temperature: tested to QSC internal standards between -20° and 50° C	High and low temperature: tested according to QSC internal standards between -20° and 50° C	High and low temperature: tested according to QSC internal standards between -20° and 50° C
Operating Temperature Range	-20 to 50° C / -4 to 122° F	-20 to 50° C / -4 to 122° F	-20 to 50° C / -4 to 122° F
Net weight	13.6 lb / 6.2 kg	24.1 lb / 11 kg	31 lb / 15 kg
Product dimensions	14.4” × 8.5” × 8.5” (365 × 215 × 215 mm)	17.3” × 10” × 9.9” (440 × 254 × 251 mm)	20.3” × 12.5” × 11.7” (516 × 318 × 298 mm)
Shipping weight	33.4 lb / 15.2 kg (pair packed)	32.1 lb / 14.5 kg	40.6 lb / 18.45 kg
Shipping dimensions	20" × 12” × 23” (510 × 305 × 585 mm) (pair packed)	24.3 × 13.8” × 13.8” (729 × 351 × 351 mm)	31.7” × 16.1” × 16.1” (805 × 409 × 409 mm)
Included accessories	X-Mount mounting system, euroblock connector, input panel cover	X-Mount mounting system, euroblock connector, input panel cover	X-Mount mounting system, euroblock connector, Input panel cover
Optional accessories		YMS8T yoke mount, M10 Kit-C	YMS10T yoke mount, M10 Kit-C
	1 Free-field, -10 dB from on-axis sensitivity	1 Free-field, -10 dB from on-axis sensitivity	1 Free-field, -10 dB from on-axis sensitivity
	2 IEC60268-1 noise signal for 2 hours	2 IEC60268-1 noise signal for 2 hours	2 IEC60268-1 noise signal for 2 hours
	3 On-Axis, free-field sensitivity, 2.83V, 1 m	3 On-Axis, free-field sensitivity, 2.83V, 1 m	3 On-Axis, free-field sensitivity, 2.83V, 1 m
	4 Calculated from rated noise voltage and sensitivity	4 Calculated from rated noise voltage and sensitivity	4 Calculated from rated noise voltage and sensitivity
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

System Details	AD-S12	AD-S112sw
Effective frequency range1	52 Hz to 20 kHz	30 to 135 Hz
Rated noise power / voltage2	300 watts / 50 volts (rms)	300 watts / 50 volts (rms)
Broad-band sensitivity3	95 dB SPL	90 dB SPL
Coverage angle (-6 dB)	75°
Directivity factor (Q)	12
Directivity Index	11 dB
Maximum continuous SPL4	120 dB	115 dB
Maximum peak SPL4	126 dB	121 dB
Rated impedance	8 ohms	8 ohms
Recommended amplifier power (loudspeaker "program" power)	600 watts	600 watts
Transformer taps	n/a
Transformer taps	n/a
HF transducer	1” exit / 1.4” voice coil compression driver
LF transducer	12” weather resistant paper cone woofer, 3” / 76 mm voice coil	12” weather resistant paper cone woofer, 2.5” / 64mm voice coil
LF transducer
Input connector type	Euroblock connector with parallel output terminals	Euroblock connector with parallel output
Enclosure material	Painted ABS polymer	Painted ABS polymer
Grille material	Powder coated aluminum	Powder coated aluminum
Yoke material		Powder coated galvanized steel
Enclosure Details
Ingress protection	IP-54	IP-54
Operating environment	Designed for indoor and outdoor use	Designed for indoor and outdoor use
Testing	The AD Series loudspeakers qualified for outdoor use using the following tests:	The AD Series loudspeakers qualified for outdoor use using the following tests:
	Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.	Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
	Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days	Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
	High and low temperature: tested according to QSC internal standards between -20° and 50° C	High and low temperature: tested according to QSC internal standards between -20° and 50° C
Operating Temperature Range	-20 to 50° C / -4 to 122° F	-20 to 50° C / -4 to 122° F
Net weight	35.2 lb / 16 kg	29 lb / 13.2 kg
Product dimensions	23.4” × 13.9” × 12.7” (594 × 354 × 323 mm)	23.4” × 13.9” × 12.7” (594 × 354 × 323 mm)
Shipping weight	46.3 lb / 21 kg	43.1 lb / 19.6 kg
Shipping dimensions	34.5” x 17.9” x 17.2” (765 x 455 x 437 mm)	27.5” x 21.75” x 18.5” (698 x 552 x 470 mm)
Included accessories	X-Mount mounting system, euroblock connector, Input panel cover	Yoke mounting system, euroblock connector, input panel cover
Optional accessories	YMS12 yoke mount, M10 Kit-C
	1 Free-field, -10 dB from on-axis sensitivity	1 Free-field, -10 dB from on-axis sensitivity
	2 IEC60268-1 noise signal for 2 hours	2 IEC60268-1 noise signal for 2 hours
	3 On-Axis, free-field sensitivity, 2.83V, 1 m	3 On-Axis, free-field sensitivity, 2.83V, 1 m
	4 Calculated from rated noise voltage and sensitivity	4 Calculated from rated noise voltage and sensitivity

Prop 65 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.