Episode® Signature Retrofit In-Wall Subwoofer Enclosure - Single 8"
The Episode Signature Retrofit In-Wall Subwoofer Enclosure increases sound performance by adding consistent air volume. The retrofit enclosure is capable of housing a single subwoofer in the wall, or you can also add a second enclosure either vertically or horizontally for the perfect dual subwoofer configuration. Plus, the design allows you to install an architectural subwoofer after the sheetrock is added, while still getting defined air volume. This enclosure has a minimal footprint, so you can easily hide subwoofers anywhere – small or large rooms, theatres, distributed audio, and more.
Important Note - Be sure to align the dog ear screw with the marking on the back box. If this is not done, the dog will jam against the side wall of the enclosure and can become difficult to remove.
Increased Performance
This Episode Signature Retrofit Enclosure gives a subwoofer a defined air volume for more consistent audio performance. Plus, adding a subwoofer is known to improve a customer’s overall satisfaction with their sound system.
Pre-Wired
This enclosure is pre-wired for use with an Episode Signature Free Air Subwoofer.
Professional Design
This enclosure has built-in dog ears and provisions for joint fasteners in a sturdy metal-front baffle frame. Vinyl-wrapped MDF enclosure reduces both resonance of the subwoofer and noise transmission to adjacent rooms. The included foam pads also eliminate resonance. Dog ears are included, with the option to screw to studs from the frame. Simply place the subwoofer in the enclosure and engage the dog ears. Be sure to align the dog ear screw with the area marked on the front of the enclosure.
Discreet Solution
The thin design of this enclosure makes it perfect for under couches or beds. It can be laid flat to hide discreetly under furniture.
Easy Wiring
The terminal cup on the outside of the enclosure and the internal pigtail wire allow for easy wiring and install of the subwoofer after sheetrock is added.
Thin-Bezel Design
Magnetic, one-step paintable grille keeps the speaker out of sight for a smooth, minimalistic finish. High-strength neo-magnets around the perimeter hold the grille securely in place, but still allow you to remove it easily when needed. You can also purchase a Thin-Bezel Grille Kit in white or black to bring a uniform look to multiple (2) retrofit enclosures.
Wall Accommodation
This enclosure hides in a standard 2 x 4" stud bay for a flush install that won’t take up valuable space. You can install two back boxes either vertically or horizontally, spanning across two stud bays without needing to cut the stud.
Connector Type |
|
Gold-Plated PushTerminals |
Frequency Response |
|
Down to 22 Hz |
Features |
|
Grille: Steel Micro-Perf Mesh /White / low profile thin bezel Included; Optional ESS-GRL-DSUB8-RET-WT and ESS-GRL-DSUB8-RET-BLK for dual retrofit subwoofer installations. |
Thickness |
|
5/8" (Enclosure Material Wall Thickness) |
Dimensions (W x H x D) |
|
14" × 14" × 4.25" |
Mounting Depth |
|
3.88" |
Cutout Diameter |
|
12" × 12" |
Weight |
|
10.4 lb |
Lifetime Limited Warranty
This Episode® product has a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).
 | Loading… |
 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|