Episode® Signature Preconstruction In-Wall / Ceiling Subwoofer Enclosure - Single 8"
ESS-SUB-ENC-IWIC-PCO
The Episode Signature Preconstruction In-Wall/In-Ceiling Subwoofer Enclosure increases sound performance by adding consistent air volume. The preconstruction enclosure is capable of housing a single subwoofer in the ceiling. This enclosure has a minimal footprint, so you can easily hide subwoofers anywhere – small or large rooms, theatres, distributed audio, and more.
Increased Performance
A preconstruction back box will give a subwoofer a defined air volume for an improved and more consistent audio performance. A vinyl-wrapped MDF enclosure reduces both resonance of the subwoofer and noise transmission to adjacent rooms, and the included foam pads eliminate resonance even further. Plus, adding a subwoofer is known to improve a customer’s overall satisfaction with their sound system.
Pre-Wired
This enclosure is pre-wired for use with an Episode Signature Free Air Subwoofer.
Easy Wiring
A terminal cup on the outside of the enclosure allows for easy wiring before sheetrock is installed, while internal wiring within the enclosure allows for easy wiring of the subwoofer after sheetrock is added.
Adaptable
This enclosure is compatible with all existing 8" Episode grilles, which are available in round, square, bezel, bezel-less, and black options.
Wall Accommodation
This enclosure fits in a standard 2 x 6" hidden stud bay and can accommodate sheetrock thicknesses from single 1/2" to dual 5/4" for a flush install that won’t take up valuable space. The enclosure can span up to 24" between joists with included expansion arms, and arms also allow for side-to-side adjustment.
Easy Install
Simply mount the front-facing steel flanges to the stud, overlay the sheetrock, and cut using the included drywall flange for guaranteed hole cutout. Once this is completed, you can easily insert the subwoofer.
Connector Type |
|
Gold-Plated PushTerminals |
Frequency Response |
|
Down to 20 Hz |
Features |
|
Uses grille fromESS-SUB-SNGL-8 oroptional ESS grilles |
Thickness |
|
5/8" (Enclosure Material Wall Thickness) |
Dimensions (W x H x D) |
|
12.8" × 12.8" × 5.4" |
Mounting Depth |
|
5.13" |
Cutout Diameter |
|
9.7" |
Weight |
|
7.9 lb |
Lifetime Limited Warranty
This Episode® product has a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).
 | Loading… |
 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|