unD6IOWU White Finish/UDP 3rd Party Control Compatible
Dante Networked Audio Wall Plate - 4x2 Multi I/O
SUMMARY - A 4-in, 2-Out I/O Interface that is a convenient, cost-effective way to add up to 6 channels of Dante audio to an existing Dante-based networked audio system.
INPUTS - 2 XLR input with switchable mic/line gain and switchable phantom power on the inputs. Choice of unbalanced input (RCA or 3.5mm stereo jack) selectable by software.
OUTPUTS - One 3.5mm output, and two balanced outputs on a side-mounted depluggable connector with software controlled volume.
CONTROL - Audio flow assignment, input gain, phantom power and unbalanced input selection are all controllable via the Dante network connection.
*Fully DDM Ready
Firmware Compatibility Note: Two versions of firmware are available for this product that each support a different control method.
Audio routing note: The input configuration can be modified using the unIFY Control Panel software or other compatible controllers. Audio from either Input 3A+4A or Input 3B+4B can be chosen as the input source for Dante TX channels 3 and 4. Audio from Dante output channels 1 and 2 is sent to Output 1 and 2, respectively, and simultaneously to the in-wall balanced outputs. The following diagram illustrates the internal audio signal path of the unD6IO.
Audio Flow Diagram
FEATURES AND BENEFITS
Fully DDM ready
2 balanced XLR mic/line inputs, 2 RCA and one 3.5mm input, one 3.5mm output, and two balanced outputs on a sidemounted depluggable connector, with software controlled volume
802.3af compliant PoE powered to work with any compliant PoE network switch
3 gain levels are available on the XLR input to accomodate a wide variety of input levels and devices. Input gain is adjustable via software
+48V Phantom power - powers virtually all types of phantom powered microphones typically used in installed AV systems. Phantom power is switchable via software
ID LED allows easy identification of the unD6IO with which Attero Tech’s Unify software is communicating
RCA inputs and 3.5mm input (carried as stereo) can be selected via software, individually or in combination, as an audio flow (see Audio Flow diagram)
APPLICATIONS
Convenient, wall mounted mic/line I/O drops for:
Hotel ballrooms
Conference/meeting centers
Conference rooms
Sports, spa and fitness facilities
Convention centers
SPECIFICATIONS
XLR Mic/Line Input Type: Balanced and RF filtered
Phantom Power: +48V, software selectable
Mic/Line Gain: -18dB, -3dB, +25dB, +40dB, all software selectable
Input Impedance: >1.8K ohms at any gain setting
Equivalent Input Noise: -115dBu (+40dB gain)
Maximum Input Levels (XLR): +20dBu @ -18dB gain, +6dBu@ -3dB gain, -23dBu @ +25dB gain, -38dBu at +40dB gain RCA and 3.5mm
Inputs: RF filtered line level, input source software selectable
Maximum Input Levels (3.5mm/RCA): +12dBu
Depluggable Output Type: Balanced line level with automatic muting on loss of Dante signal (located on the side of the unD6IO)
Output Gain: 0dB to -60dB in 1dB steps, software selectable
Output Noise: <-90dBu @ 0dB gain Maximum Output Level (Balanced depluggable): +20dBu 3.5mm
Output: RF filtered line level
Maximum Output Level(3.5mm): +12dBu System THD: <.02% at any gain, input signal 3dB below maximum
PoE Class: Class 0 802.3af PoE PD compliant
Certifications: FCC 47CFR Parts 15B and 18 (Class A), EN 55011, ICES-003, CE (EN55022 Class A and EN55024 Class A)
Power Consumption: 5.5W maximum
Dimensions: 3.54” W x 4.2” H x 1.88” D
Operating Temperature: 0°C ‐ 40°C