800-795-5111

Home >>

COMMERCIAL

COMMERCIAL ACCESSORIES

4X2CH 2 GANG US WALL PLATE W/ XLR PHOENIX I/O POE WH SYMNT

Other products by	Attero Tech
	(Tech Support Website)

Item #:

UNDX4IWC

MSRP:

No Retail

Description
Description

unDX4IWC White Finish/SymNet Control Compatible

Dante Networked Audio Wall Plate - 4x2 Mic/Line I/O (4 Mic)

SUMMARY - A cost effective multi-IO wall box with four balanced mic/line XLR inputs and two balanced line outputs on an in-wall Phoenix connector

INPUTS - 4 balanced XLR mic/line input

OUTPUTS - 2 balanced line outputs on Phoenix depluggable connectors

CONTROL - Audio flow assignment, input gain per input, and phantom power per input are all controllable via the Dante network connection

Firmware Compatibility Note: Two versions of firmware are available for this product that each support a different control method.

*Fully DDM Ready

FEATURES AND BENEFITS

 Fully DDM ready

 4 balanced XLR mic/line inputs

 2 balanced line outputs on Pheonix depluggable connectors

 802.3af compliant PoE powered to work with any compliant PoE network switch

 Three input gains accommodate common line levels, phantom power and dynamic mics. Input gains are adjustable via software on a per input basis

 +48V Phantom power per channel - powers virtually all types of phantom powered microphones typically used in installed AV systems

 ID LED allows easy identification of which unDX4I Attero Tech’s Unify software is communicating with

 The balanced line outputs can be wired to any passive XLR plate such that 4 XLR inputs and 2 XLR outputs are available in a 3-Gang US wall space.

SPECIFICATIONS

Mic/Line Input Type: Balanced and RF filtered 3-pin depluggable

Phantom Power: +48V, software selectable

Mic/Line Gain: -18dB, -3dB, +25dB, +40dB, software selectable

Input Impedance: >1.8K ohms at any gain setting

Equivalent Input Noise: -115dBu (+40dB gain)

Maximum Input Levels: +20dBu @ -18dB gain, +6dBu @ -3dB gain, -23dBu @ +25dB gain, -38dBu @ +40dB gain

Output Type: Balanced line level with automatic muting on loss of Dante signal

Output Gain: 0dB to -60dB, in 1dB increments software adjustable

Output Noise: <-80dBu @ 0dB gain

Maximum Output Level: +20dBu

System THD: <.02% at any gain, input signal 3dB below maximum

PoE Class: Class 0 802.3af PoE PD compliant

Certifications: FCC 47CFR Parts 15B and 18 (Class A), EN 55011, ICES-003, CE (EN55022 Class A and EN55024 Class A)

Power Consumption: 6.5W maximum

Dimensions: 3.60” W x 2.75” H x 1.88” D

Operating Temperature: 0°C ‐ 40°C

Prop 65 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.