unAX2IO+B Black Finish

AES67 Networked Audio Wall Plate - 4x2 Mic/Line I/O (2 Mic)

SUMMARY - A 2-in, 2-out I/O Interface that is a convenient, cost-effective way to add up to two channels (in and out) of AES67 audio to an existing Dante-based networked audio system

INPUTS & OUTPUTS - XLR balanced audio inputs and outputs, switchable mic/line gain and switchable phantom power on the inputs. An additional 2 Balanced line inputs are accessible on side of unit for use with a companion unXP2I passive expansion plate.

CONTROL - Audio flow assignment, input gain and phantom power are all controllable via the AES67 network connection.

FEATURES AND BENEFITS

 Small form factor, can be unobtrusively located near analog sources or sinks

 Dual power (DC or PoE) means the unAIO2x2+ will work in systems with either standard or PoE Ethernet switches

 Five input gains to accommodate common line levels, phantom powered and dynamic mics

 +48V phantom power per channel - powers virtually all types of phantom powered microphones typically used in installed AV systems

 Analog output volume: software adjustable between 0dB and –60dB plus mute to accommodate all types of line input audio equipment—both consumer and pro levels

 Industry standard +20dBu maximum input levels (at 0dB input gain w/pad active) and +20dBu maximum output levels

 Full AES67 system status LEDs on the front panel

 AES67 is compatible with all QSC Core DSPs

 Built-in tone generator for audio system diagnostics

APPLICATIONS

 Addition of microphones or other sources where analog cabling would be expensive or is not available back to a central rack

 Network enable analog input power amplifiers or powered speakers

 Multi-point network audio distribution

SPECIFICATIONS

Mic/Line Input Type: Balanced and RF filtered 3-pin depluggable

Phantom Power: +48V, software selectable

Mic/Line Gain: -12dB (pad active), 0dB, +15dB, +30dB, +45dB, software selectable

Input Impedance: >1.8K ohms at any gain setting

Equivalent Input Noise: -119dBu (+45dB gain)

Maximum Input Levels: +20dBu @ 0dB gain (with pad active), +8dBu @ 0dB, -7dBu @ +15dB gain, -22dBu @ +30dB gain, -37dBu @ +45dB gain

Output Type: Balanced line level with automatic muting on loss of AES67 signal

Output Volume: 0dB to –60dB plus mute, software selectable

Output Noise: <-85dBu @ 0dB gain

Maximum Output Level: +20dBu (@ 0dB output gain)

System THD: <.05% at any gain, input signal 3dB below maximum

Power Consumption: < 5W max

PoE Class: Class 0 802.3af PoE PD compliant

Certifications: FCC 47CFR Parts 15B and 18 (Class A), EN 55011, ICES-003, CE (EN55022 Class A and EN55024 Class A)

Dimensions: 1.06”H x 6.45”W x 3.45”D

Operating Temperature: 0°C ‐ 40°C