Episode Response DSP Amplifier
EA-RSP-8D-100
Episode Response Series amplifiers take multiroom audio to the next level, giving pros a matrix switching DSP amp that delivers incredible audio in up to 8 rooms - all in one convenient package. Available in three models, 8, 12, and 16 channels (4, 6, and 8 zones), these amps utilize a high-tech digital signal processing that provides clean and accurate audio in any space. They are also IP controlled, OvrC compatible, and have drivers for all popular control systems for an easy-to-control audio experience. With our Response Series amps, simply add sources and you're set.
Clean and Fast Installs
Save space and time with the Response Series amps. It has a pre-amp, DSP, matrix switch, and amplification built-in to a single chassis, which saves rack space and cuts down on wiring to make your job easier – all while delivering superior sound.
Benefits of a Digital Signal Processor
Digital Signal Processor, or DSPs, are essential in creating great sound. The built-in DSP delivers stellar audio in a variety of spaces with its onboard 10-band parametric EQ, letting you and your customer find the perfect sound via a browser UI.
Control System Integration
Response Series amps easily integrate with Control4 and other popular control systems. With a full set of pre-built drivers, it’s just a matter of dropping in a file to integrate with the control system of your choice.
IP Controlled
Equipped with IP control, this amp is not only a breeze to automate, but it’s also easily configured during your install, giving you and your customers a flawless experience with easy monitoring and control. For legacy installs, control Response Series amps with the built-in IR port.
Sub Out in Every Zone
Dedicated subwoofer outputs per zone make wiring and configuration simple and fast, letting you add an Episode architectural subwoofer and digital subwoofer amplifier to any room. Adding a subwoofer gives your customers full-frequency audio that delivers a rich and full audio experience that's incredibly accurate and satisfying.
Smart & Powerful
These amps pump out 100 watts per channel at 4-ohms and 50 watts at 8-ohms for powerful multiroom audio. Additionally, each Response Series amp is IP controlled, OvrC enabled, and features Signal Sensing and a 12v trigger for power saving - making these amps easy to integrate and easy to use.
Reliable Amplification
These amps feature an active variable/dynamic cooling system to increase longevity. They also feature anti-clipping technology that protects both the amp and speakers from being overdriven. Rackmount ears are included and pre-installed for easy mounting.
Superior Sound
Built-in Signature by Episode presets make these amps the perfect match for our flagship speaker line, delivering the best sound every time. Plus, you can create, backup, and upload custom presets using built-in test signals and audio analytics. And for detailed audio, each amp has an adjustable low-pass/high-pass filter when using subwoofers.
| |
|
|
Impedance Input |
|
RCA analog input: 20kΩ |
Power Output @ 4 ohm |
|
2 channels driven: 2x100W 1 kHz
All Channels: 8x100W 1 KHz |
Power Output @ 8 ohm |
|
2 channels driven: 2x50W 1 kHz
All Channels: 8x50W 1 KHz |
Power Output Bridged @ 8 ohm |
|
4 x 200W 1 KHz |
Sensitivity Input |
|
1 Vrms |
Topology |
|
Class D |
Total Harmonic Distortion (THD) |
|
0.01% 1 kHz @1/8 rated power 4Ω or 8Ω |
Connector Type |
|
1 x RJ45 (ethernet), Stereo RCA inputs, 4x Analog loop output, 8 channels: 4 stereo or bridged output Speaker outputs |
Fan Description |
|
Two fans mounted, 1 each in left and right sides |
Frequency Response |
|
20 Hz - 20 kHz < ± 2 dB |
Power Connection Type |
|
NEMA 5/15P 3 prong to IEC 60320 C13, 1.8m length |
Certifications |
|
UL, CE, FCC |
Dimensions (W x H x D) |
|
19.0 × 16.7 × 3.5 in. (483 × 424 × 89 mm)
With feet: 19.0 × 16.7 × 4.0 in. (483 × 424 × 101 mm) |
Operating Humidity |
|
20-90% RH |
Operating Temperature |
|
-10 to +50 °C (+14 to +122 °F) (indoor) |
Power Consumption |
|
800W |
Storage Temperature |
|
-30 to +70 °C (-22 to +158 °F) |
Weight |
|
18.7 lb. (8.5 kg) |
Signal to Noise Ratio |
|
>95 dB A-weighted @ rated power |
Nominal Impedance |
|
1 ohm |
RJ45 Auto Sensing |
|
2.5 mVrms |
LED Indicators |
|
Front power LED: 1x Blue LED light bar
System status LED: 8x Bi-color LED |
Dynamic Range |
|
> 100 dB A-weighted @ rated power |
2-Year Limited Warranty
This Episode® product has a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty will not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).
 | Loading… |
 WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|