PARA-JC3JR-SL | Parasound Halo Series JC 3 Jr. Phono Preamplifie - Silverr
Parasound Halo Series JC 3 Jr. Phono Preamplifier
Halo is Parasound’s premier line with a reputation for going head-to-head with the most expensive equipment on the market, while costing a fraction of the price.
Power Consumption |
Standby: <1W
Power On: 9W
115 VAC or 230 VAC 50 - 60 Hz |
|
Frequency Response |
|
Audio Crosstalk |
>80 dB at 1 kHz |
Impedance Input |
MM or MI: 47k Ω
MC Variable: 50- 550 Ω |
Sensitivity Input |
at 1 kHz, 4mV Input
40 dB: 4 mV for 450mV output
50 dB: 4 mV for 1.4 Volts output
60 dB: 4 mV for 4.25 Volts output
at 1 kHz, 1V Output
40 dB: 9 mV for 1.0 Volt output |
Signal to Noise Ratio |
40 dB setting:
>85dB, input shorted, IHF A-weighted
>80dB, input shorted, unweighted
50 dB setting:
>89dB, input shorted, IHF A-weighted
>84dB, input shorted unweighted
60 dB setting:
> 94dB, input shorted, IHF A-weighted |
External Trigger Voltage |
+9 Vdc to +12 Vdc, 5 mA |
Connectors |
XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return) |
Dimensions (W x H x D) |
17.25" x 1.75" x 14.75" (438 x 45 x 375mm) (without feet)
17.25" x 2.5" x 14.75" (438 x 64 x 375mm) (with feet)
Depth with cables: 17" (432mm) |
Weight |
Net Weight: 13 lbs (5.9 kg)
Shipping Weight: 19 lbs (8.6 kg) |
Halo has earned honors and awards that are unmatched. Parasound's Halo JC 3 Jr. is John Curl design with unbalanced inputs and outputs using Vampire RCA jacks, plus balanced outputs using Neutrik XLR jacks. A variable MC load adjusts both channels from 50-550 Ohms.
Designed by John Curl
John Curl is one of the finest analog audio designers of all time. In the ‘70s he designed mixing consoles for the Grateful Dead and Jefferson Airplane, then the original Mark Levinson JC 2, Vendetta Research, his own brand, a $75,000 phono stage for Constellation Audio. Since 1989 Curl has guided Parasound in developing amplifiers and preamplifiers with a reputation for superior sonics, high value and longevity.
Multiple Cartridge Settings
A custom-made three-position input impedance/gain switch provides for 47k Ohm MM, variable impedance MC, and 47k Ohm MC. The latter is an ideal load for some MC cartridges and high-end moving iron cartridges. Variable MC load adjust independent for each channel from 50-550 ohms with dual gang potentiometers specially made for Parasound by Vishay.
Balanced XLR Outputs
Recording and broadcast studios use balanced connections exclusively because of their inherent ability to reject noise and hum, thus assuring the best sound. Certain high quality preamplifiers and surround controllers built for residential use utilize balanced connections with XLR jacks for the same reasons. All Parasound Halo series power amplifiers have balanced inputs with XLR jacks so you can take full advantage of their inherent noise reduction capability.
Toroid Power Transformer
High speed-soft recovery bridge rectifiers and common mode inductors. Low ESD power supply filter caps offer greater reserve for head-snapping dynamics. Shielded toroid power transformer reduces noise. Aluminum shield separates power supply and audio circuits. Incredible S/N up to 94 dB and THD less than 0.02%.
Distributed Brand Warranty
We want to make our Affiliate program as easy as possible. That’s why we process all claims directly, without any third party telephone tag. Specific warranty terms and details from the manufacturer are below. View the full Parasound Warranty.
| Loading… |
WARNING: This product contains chemicals including Styrene which is known to the state of California to cause cancer, and Bisphenol A (BPA), which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In certain instances promotional prices will be offered listed above as a “Price with Rebate”, and are typically dated. In these cases Instant Rebate (IR) pricing is good sometimes only for the day only or only for the week. In order to be eligible for IR pricing – the order must be paid for AND picked up/shipped out. If you are placing an online order outside of business hours within your respective time zone, please add a note to your order for the team to confirm the pricing, or contact the branch the following business day to ensure that the item pricing carries over into the subsequent period. If an alternate branch location is still open in another time zone, please reach out to that group.
|